Fixed Point RSFP-X90 (Resumption Point)

One reference point for all instruments

Fixed Point for all RS products with magnetic base

A survey point for all current surveying instruments such as: total stations, robotic total stations, scanners, drones, Lidar, SLAM, Mobile Mapping, GPS and GNSS!

Using the correct offset, the surveyor always obtains the same survey point or the same XYZ coordinates. The fixed point can be glued to all usual surfaces. For ease and speed of mounting, we recommend RSMK-FIX construction glue.

When aligning the prisms or reflective targets in different directions the survey point remains the same. Use in almost any direction is thus assured.

Additional advantages 

• Depending on the instruments, accuracies of ±1 mm are possible
• The fixed point system RSFP-X90 to RSFP-X99 is made of special stainless steel which reacts to magnets
• Magnets in the base plate hold various products exactly on the same point
• For repeat surveys, the resumption point RSFP-X90 is much appreciated, as it is almost invisible to passers-by, e.g. on bridges or façades.
• On building sites, the resumption point RSFP-X90 is used as a reference point
• Perfect for BIM, for surveys with scanners Scanner, Lidar or SLAM
   
  

The illustration shows all the products that can be used with the RSFP-X90 fixed point. Magnets in the base plate hold the reflective target or mini prism precisely on the desired spot.

If greater magnetic adhesion to the adapter is desired or required, we recommend the series RSFP-X99.