Smart Target RSAKZ6 - Carrier plate with reflective target

Smart Target RSALU22 - Aluplate with reflective target

RSAKZ6

Carrier plate with reflective target

RSALU22

Aluplate with reflective target

Precision over long distances

These Smart Targets are used whenever measurements over longer distances are required.
The RSAKZ6 targets feature a 60 x 60 mm reflective target and offer a range of approximately 120 m, or up to 250 m and beyond in reflectorless mode. The RSALU22 panels, made with a 260 x 260 mm aluminum plate and equipped with a 220 x 220 mm reflective target, are suitable for measurements up to 500 m.

To secure the survey point for a longer period, markings were applied to the carrier plates so that any damaged reflective target can easily be replaced and the original measuring point can be restored quickly, easily and cheaply.

The ranges are dependent on the device and can be affected by weather and environmental conditions.

Please note: Survey markers with reflective targets are exclusively recommended for carrying out distance measurements using a tachymeter or total station.
Survey markers with crosshairs, and without reflective targets, are available for the use of levelling instruments, theodolites and construction lasers.

Carrier plate RSAKZ6 with reflective target 60 x 60 mm,
120 mm x 75 mm 

Aluplate RSALU22 with reflective target 220 x 220 mm,
260 mm x 260 mm 

Dimensioning file RSAKZ6 and RSALU22.pdf for download.
Here you find a dimensioning file for each RS product