BIM Construction Targets

RS30 & RS31* (*self-adhesive)

RS40 & RS41* (*self-adhesive)

Perfect reference points for BIM (Building Information Modeling)
-> Unmistakable fixed points for all trades 
-> A fixed point for all surveying instruments currently used!

The targets RS30 and RS40 permit documentation and permanent security of heights and axes with a single product. If different measuring devices are at a construction site, the BIM targets are the best solution to avoid measuring differences. 
Whether leveling instrument, laser, theodolite, or total station: The BIM Construction Targets provide the optimal reference point for each instrument and ensure identical heights, axes, and coordinates across all trades.

On difficult surfaces, the markers are permanently fastened with adhesive or with plugs and screws. A protrusion where a meter ruler or measuring rod can be placed guarantees the exact measurement of the height.

Crosshairs are imprinted on the backing plate under each reflective target to ensure the survey point is durably marked. Should the reflective target be damaged, its replacement is no problem.There is thus no loss of the original survey point and the uniqueness and durability of the survey point in accordance with BIM are guaranteed.
For distance measurements with total stations, use only targets with reflective sheets.
The ranges depend on the survey instrument and are influenced by weather and ambient conditions.

Survey markers with crosshairs, and without reflective targets, are available for the use of levelling instruments, theodolites and construction lasers.